Preparation of 17β‐estradiol‐imprinted material by surface‐initiated atom transfer radical polymerization and its application

A novel 17β‐estradiol molecularly imprinted polymer was grafted onto the surface of initiator‐immobilized silica by surface‐initiated atom transfer radical polymerization. The resulting molecularly imprinted polymer was characterized by elemental analysis and thermogravimetric analysis. The binding property of molecularly imprinted polymer for 17β‐estradiol was also studied with both static and dynamic methods. The results showed that the molecularly imprinted polymer possessed excellent recognition capacity for 17β‐estradiol (180.65 mg/g at 298 K), and also exhibited outstanding selectivity for 17β‐estradiol over the other competitive compounds (such as testosterone and progesterone). Then, the determination of trace 17β‐estradiol in beef samples was successfully developed by using molecularly imprinted polymer solid‐phase extraction coupled with high‐performance liquid chromatography. The limit of detection was 0.25 ng/mL, and the amount of 17β‐estradiol in beef samples was detected at 2.83 ng/g. This work proposed a sensitive, rapid, reliable, and convenient approach for the determination of trace 17β‐estradiol in complicated beef samples.     

Column preconcentration and electrothermal atomic absorption spectrometric determination of rhodium in some food and standard samples

In the present work, an electrothermal atomic absorption spectrometric method has been developed for the determination of ultra‐trace amounts of rhodium after adsorption of its 2‐(5‐bromo‐2‐pyridylazo)‐5‐diethylaminophenol/tetraphenylborate ion associated complex at the surface of alumina. Several factors affecting the extraction efficiency such as the pH, type of eluent, sample and eluent flow rates, sorption capacity of alumina and sample volume were investigated and optimized. The relative standard deviation for eight measurements of 0.1 ng/mL of rhodium was ±6.3%. In this method, the detection limit was 0.003 ng/mL in the original solution. The sorption capacity of alumina and the linear range for Rh(III) were evaluated as 0.8 mg/g and 0.015–0.45 ng/mL in the original solution, respectively. The proposed method was successfully applied for the extraction and determination of rhodium content in some food and standard samples with high recovery values.     

Solid‐phase extraction based on a molecularly imprinted polymer for the selective determination of four benzophenones in tap and river water

This work reports the preparation of molecularly imprinted polymer particles for the selective extraction and determination of four benzophenones from aqueous media. The polymer was prepared by using 4‐vinylpridine as functional monomer, ethylene glycol dimethacrylate as cross‐linker, acetonitrile as porogenic solvent and 2,2’,4,4’‐tetrehydroxybenzophenone as template. Good specific adsorption capacity (Q_max = 27.90 μmol/g) for 2,2’,4,4’‐tetrehydroxybenzophenone was obtained in the sorption experiment and good class selectivity for 2,2’,4,4’‐tetrehydroxybenzophenone, 2,4‐dihydroxybenzophenone, 2,2’‐dihydroxy‐4‐methoxybenzophenone, 2,2’‐dehydroxy‐4,4’‐dimethoxybenzophenone was demonstrated by the chromatographic evaluation experiment. Factors affecting the extraction efficiency of the molecularly imprinted solid‐phase extraction procedure were investigated systematically. An accurate and sensitive analytical method based on the molecularly imprinted solid‐phase extraction coupled with high‐performance liquid chromatography and diode array detection has been successfully developed for the simultaneous determination of four benzophenones from tap water and river water with method detection limits of 0.25–0.72 ng/mL. The recoveries of benzophenones for water samples at two spiking levels (500 and 5000 ng/mL for each benzophenone) were in the range of 86.9–103.3% with relative standard deviations (n = 3) below 9.2%.     

浊点萃取-荧光光度法测定水中的苯酚

基于非离子表面活性剂Triton X-100,以浊点萃取结合荧光光度法测定水中的苯酚,考察影响浊点萃取的各种因素。在pH=3.0的磷酸氢二钠-磷酸二氢钾缓冲溶液中,采用2.0mL Triton X-100(5%)、82℃平衡温度、8min平衡时间的条件下,苯酚被萃取到Triton X-100表面活性剂相与水相分开,用于环境水样中苯酚的测定,结果令人满意。     

电感耦合等离子体质谱(ICP-MS)法测定地质样品中的金

建立了王水溶解-聚氨酯泡沫塑料吸附-电感耦合等离子体质谱(ICP-MS)法测定地质样品中的金。探讨了振荡时间对回收率的影响,最终确定振荡时间为1h。在优化条件下,方法的相对标准偏差(RSD,n=12)在4.2%~9.0%,加标回收率在92.00%~114.6%,方法检出限为0.11ng/g。方法操作简单,测定精密度高,检出限低,满足大批量地质样品的分析需要。     

Quantification of fatty acids in erythrocytes and plasma by fast gas chromatography

As a result of the heterogeneous nature of lipid classes in complex biological matrices such as plasma and erythrocytes, it is imperative to have a robust and validated methodology for fatty acid quantification. The effective method presented here combines available methodology of fast gas chromatography and an improvement of the sample preparation methodology before injection into the gas chromatograph. This methodology ensures complete transesterification and quantification of total and individual fatty acids (and not only in relative amounts) by addition of internal standards. We considered sample preparation key, and we established the use of lysis buffer and ethanol for erythrocytes and plasma sample preparation, respectively. Fatty acid profile was determined by acid methylation and fast gas chromatography equipped with a flame ionization detector. The triacylglycerol 13:0, phosphatidylcholine 23:0, and methyl esters 21:0 were used as internal standards. Within the linearity of the calibration, the ratio of the peak area of each fatty acid over the peak area of the internal standard was constant (coefficient of variation ≤ 2.5). Satisfactory repeatability <15% and intermediate reproducibility < 15% were observed. Finally, this validated method was applied to a pre‐clinical trial that investigated the impact of dietary fats on accretion of specific fatty acids in plasma and erythrocytes.     

g-C3N4/SnS2 Heterostructure: a Promising Water Splitting Photocatalyst

Graphite-like carbon nitride (g-C₃N₄) based heterostrutures has attracted intensive attention due to their prominent photocatalytic performance. Here, we explore the g-C₃N₄/SnS₂ coupling effect on the electronic structures and optical absorption of the proposed g-C₃N₄/SnS₂ heterostructure through performing extensive hybrid functional calculations. The obtained geometric structure, band structures, band edge positions and optical absorptions clearly reveal that the g-C₃N₄ monolayer weakly couples to SnS₂ sheet, and forms a typical van der Waals heterojunction. The g-C₃N₄/SnS₂ heterostructure can effectively harvest visible light, and its valence band maximum and conduction band minimum locate in energetically favorable positions for both water oxidation and reduction reactions. Remarkably, the charge transfer from the g-C₃N₄ monolayer to SnS₂ sheet leads to the built-in interface polarized electric field, which is desirable for the photogenerated carrier separation. The built-in interface polarized electric field as well as the nice band edge alignment implys that the g-C₃N₄/SnS₂ heterostructure is a promising g-C₃N₄ based water splitting photocatalyst with good performance.     

Further study of alternating iterations for rectangular matrices

Theory of matrix splittings is a useful tool in the analysis of iterative methods for solving systems of linear equations. When two splittings are given, it is of interest to compare the spectral radii of the corresponding iteration matrices. This helps to arrive at the conclusion that which splitting should one choose so that one can reach the desired solution of accuracy or the exact solution in a faster way. In the case of many splittings are provided, the comparison of the spectral radii is time-consuming. Such a situation can be overcome by introducing another iteration scheme which converges to the same solution of interest in a much faster way. In this direction, the theory of alternating iterations for real rectangular matrices is recently proposed. In this note, some more results to the theory of alternating iterations are added. A comparison result of two different alternating iteration schemes is then presented which will help us to choose the iteration scheme that will guarantee the faster convergence of the alternating iteration scheme. In addition to these results, a comparison result for proper weak regular splittings is also obtained.     

基于EV模型ND样本加权和的相合性

本文研究变系数EV模型的ND样本加权和的相合性问题.利用ND序列的Bernstein型不等式和截尾的方法,获得了ND样本加权和sum from i=1 to n(W_(ni)(t_0)Y_i)的强、弱相合性,推广了独立随机变量加权和的相合性.     

Z型CdIn2S4/ZnSnO3异质结的构筑及其光催化产氢性能

通过高温煅烧ZnSn(OH)₆前驱体制备了双壳中空立方体结构的ZnSnO₃(ZSO),进而采用水热法将CdIn₂S₄(CIS)纳米晶包裹在ZSO表面,成功制备了CdIn₂S₄/ZnSnO₃(CIS/ZSO)异质催化剂。活性产氢实验结果表明,CIS、ZSO物质的量之比为12%时制备的12% CIS/ZSO具有优异的光催化产氢性能,在3 h内产氢量为1 676.48 μmol·g^-1,分别是ZSO和CIS的12倍和8倍。ZSO光催化析氢反应活性的增强归因于CIS/ZSO异质结构的成功构建,异质界面的形成显著提高了光生电子/空穴对的分离效率,降低了其复合率。通过对电荷转移路径的分析,提出了可能的反应机理。